IviRFSigGen Configure Power Sweep Start Stop [PSW]

IviRFSigGenPowerSweep Capability Group

This VI configures the start and stop power for a power sweep. If the stop power is less than the start power, the power decreases in value during the sweep.

	instrument handle The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs.
	start Specifies the start power of the sweep. If the stop power is less than the start power, the power decreases in value during the sweep. The driver uses this value to set the IviRFSigGen>>Sweep>>Power Sweep>>Power Sweep Start property. Units: dBm Default Value: -50.0 dBm
	stop Specifies the stop power of the sweep. If the stop power is less than the start power, the power decreases in value during the sweep. The driver uses this value to set the IviRFSigGen>>Sweep>>Power Sweep>>Power Sweep Stop property. Units: dBm Default Value: -10.0 dBm
	error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.
	instrument handle out The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs.
	error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.